Category: Office Lighting

  • Tamper Proof Lights

    What are Tamper Proof Lights for Businesses?

    Depending on the location, commercial buildings, warehouses and storage centers are sometimes prone tampering and vandalism. Outdoor lighting and security cameras can help decrease such occurrences; however, in some cases, the units become the target themselves. To prevent unnecessary destruction, building owners may opt to install tamper proof lights around the area.

    Vandal Proof Lighting

    Robust lighting designs are applied to tamper proof lamps, such as wall packs and LED spotlights. A focal point in the fixture is the lens, which is a common and preferred entry point due to its breakable nature. Traditionally, fixtures are equipped with glass lenses. Replacing the components with non-breakable material, such as polycarbonate, can deter criminals from attempting to shatter the lens.

    Additionally, sturdy enclosures help improve durability from rough contact, as well as bad weather. Connected lighting fixtures could also come with a lockable enclosure to protect wireless equipment. Ideally, wiring should not be exposed and fed through the back of the lamp to prevent deactivation of the unit.

    Types of Tamper Proof LED Lights

    As mentioned earlier, LED wall pack lights, wall scones, LED spotlights, LED downlights and other types of outdoor lamps can benefit from tamper proof builds. During installation, the units can be setup at hard-to-reach sections of the building to prevent access. When going with this configuration, it is recommended to use LED spotlights for targeting specific areas from far distances. Wide-area illumination is achievable using LED floodlights.

    Compared to traditional lighting technologies, LEDs are more capable of withstand destructive forces and hard impacts. The lighting system’s solid-state build ensures vibration and shaking have minimal effects on the performance of the luminary. Lastly, LEDs do not contain loose filaments present in incandescent and fluorescent bulbs or lamps, which can become a major point of failure in situations involving vandalism.…

  • LED Lighting Tips for Open Plan Offices in Commercial Buildings

    LED Lighting Tips for Open Plan Offices in Commercial Buildings

    Open plan layouts have been trending in commercial offices for almost a decade. The configuration utilizes a large, open room with segregated sections for various departments or tasks. Incorporating LED lighting inside businesses with open plan layouts can be complex and tricky, due to numerous considerations that need to be factored in. Such factors include the type of work being conducted in the space, working style of employees and types of activities taking place in the segregated space.

    LED Lights for Detailed Tasks

    Businesses with open plan layouts usually provide plenty of general lighting over the space. It is important to consider that changes to general lighting systems can have profound effects on the entire office, due to its shared nature. With this in mind, most of the focus for optimal office lighting in open plan configurations is illumination for detailed tasks.

    For cubicles, one should install LED lamps or cut-off fixtures that point downwards. This type of light prevents beams from trespassing into surrounding spaces. Pantry and break rooms do not require task lights. For such rooms, it would be possible to include low color-temperature LED luminaries in order to promote rest.

    Spaces Near Windows

    Open plan layouts may involve the installation of large windows for natural lighting during normal business hours. Such spaces do not need extremely bright LED lamps, compared to spaces located in the middle of the open floor area. However, because natural lighting varies greatly, depending on the time of day and weather conditions, it is recommended to use a dimmable lamp with different brightness settings.

    Lastly, offices that use numerous monitors and panels may consider applying indirect lighting systems to reduce glare. Such LED fixtures are pointed away from bright screens and the work space, at the wall or in other directions with minimal ongoing activity.…

  • Lighting Options for Cubicles

    Productive Lighting Options for Cubicles and Small Office Spaces

    Lighting Options for Cubicles

    In the past decade, open floor plan trends for office buildings have reached new heights. Taking on the configuration of a large room with segregated work spaces, cubicles and dividers, the modern arrangement is effective in reducing expenses related to building rentals and maintenance.

    Open floor plans in commercial offices have a dark side that rarely gets attention. The layout can sometimes work against employees, which has been linked to a decrease in productivity due to congestion and distractions. An effective way to curtail this unwanted effect is to boost lighting within specific cubicles or work spaces.

    LED Desk Lamps and Cabinet Lights

    LED desk lamps are a great place to start, for people who have no secondary lighting system in their cubicle. Ideally, the unit should be compact, to promote spaciousness, and always pointed downwards to reduce light trespass outside of the target location. Extendable arms are recommended for cubicles wherein detailed tasks, such as drafting, designing or soldering, are performed.

    For a sleek, low-profile option, try using LED cabinet lights. The luminaries are slim and can be installed under one’s desk, shelves or inside large storage spaces. Due to the small space, a high-powered fixture is not needed.

    What About Overhead Lighting?

    Overhead lighting over cubicles in office buildings with open floor plans could be difficult to implement, due to the shared nature of the space. A permanent fixture hanging over the target location from the ceiling could be distracting for other workers and may violate company policy.

    Alternatively, for individuals who persistently need overhead illumination, a tall, standalone lamp could be an effective lighting option for cubicles. To prevent disturbing nearby employees, a cover should be placed over the light to control the direction of the beams (downward). For decreasing eye strain during long periods of work, a lamp with dimmable features is recommended.…

  • indirect lighting

    Benefits of Indirect Lighting Configuration For Businesses

    Office spaces command the use of special lighting configurations to serve the needs of human workers inside the building. Exposure to direct lighting for long periods of time can lead to visual strain, stress and a sharp decrease in productivity. To address such challenges, indirect lighting options should be applied.

    Characteristics of Indirect Lighting

    Indirect lighting offers unique benefits for commercial spaces. This type of configuration is soft and consistent throughout the room, making it ideal for locations that use a lot of computers. Glare is greatly minimized with indirect lighting and workers are less prone to eye strain, when conducting rigorous tasks. Additionally, when workers up look at the light source, they are more likely to look at stray beams or the surface the light beam is bouncing off from. Without light beams shining directly into the eyes and face of employees, a sense of comfort is promoted inside the building.

    When mounting lights for indirect illumination, there should be a gap between the fixture and the target surface. If it’s the ceiling, the units are pointed upwards, with roughly three feet (or more) of space in between. Diagonally positioning the fixtures allows for a wider beam spread, though the quality of light decreases the further the beams travel.

    Fixtures for Indirect Lighting Systems

    Selecting luminaries for indirect lighting is a fairly straightforward process. It is important to remember that the units will be pointed at upper walls or ceilings. Because of this, the fixtures must be extremely bright to allow light to radiate and encompass the entire space. Indirect lighting is ideal for general illumination, since it’s not possible to create highly-focused beams. For such requirements, workers could use desk lamps and spotlights.

    Furthermore, since indirect lighting is noticeably softer than direct lighting configurations, businesses may incorporate large amounts of natural daylight into the building, via large windows, clear roofs, doors and etc. To prevent creating a work space that is too relaxing, high color temperature fixtures can be used for enhanced clarity.…